Product and electrical
Confirm applicable CE/EMC/LVD, RoHS, power, grounding, enclosure and ingress-protection documentation.
Compliance and safety
Confirm the installation boundary before making a compliance claim
Required markings and safeguards depend on the exact product configuration, country, environment and intended use. This page separates review topics from approved certification evidence.
Compliance and safety
Required markings and safeguards depend on the exact product configuration, country, environment and intended use. This page separates review topics from approved certification evidence.
Process environment
Review dust, washdown, temperature, vibration, abrasion, food-contact proximity and hygienic-design requirements.
Special locations
Assess hazardous-area classification, ATEX/IECEx needs, microwave frequency rules and permitted installation practices.
Document-to-equipment match
Four checks before a compliance file is accepted for a project
The useful question is not whether a logo or standard appears somewhere in a catalogue. The project must connect the required document to the exact hardware, destination, environment and installed condition.
- 01
Match product identity
Record model, hardware options, controller, serial or project reference and document revision.
- 02
Confirm destination requirements
List the country, required marking, power system and language before quotation and shipment.
- 03
Classify the process environment
Review dust, washdown, temperature, vibration, abrasion, food-contact proximity and hazardous-area status.
- 04
Close the installation record
Keep grounding, guarding, cable entry, enclosure integrity and site modifications with the as-built file.
Exact configuration and destination
Match documents and safeguards to the system that will actually be installed
Compliance begins with the exact orderable configuration and intended installation—not with a general list of standards. Country of use, supply voltage, enclosure, cables, radio-frequency route, ambient limits, dust classification, product contact and cleaning method determine which documents and safeguards must be matched to the system.
Classify the installation
Record country, indoor or outdoor use, electrical supply, environment, hazardous-area zone, hygiene boundary and intended operator interaction.
Match documents to hardware
Verify model, option, enclosure and accessory identifiers against declarations, certificates, manuals and approved drawings.
Close site risks
Review grounding, isolation, guarding, cable protection, heat, dust, washdown, lifting and safe maintenance with the site team.
Maintain the technical file
Keep the supplied documents, final drawings, risk assessment, inspection results and change history under one equipment identity.
Compliance file
Which reviewable records a compliance project should create
Standards named on this page are review categories—not a declaration that every model already holds every approval.
- 01Country and site compliance checklist
- 02Exact model and certificate matching
- 03Installation risk and protection review
- 04Approved declaration and manual pack
Installation classification
Facts needed to identify the applicable documents
- Country and final destination
- Exact model and option list
- Area classification and ambient limits
- Electrical and grounding standard
- Food-contact or hygiene requirements
- Customer document and language requirements
Claims to verify
Avoid certificate, site-scope and modification gaps
Certificate mismatch
A document for a related model or component does not automatically cover the complete installed system.
Site scope left undefined
Panels, frames, barriers and third-party wiring can introduce obligations outside the sensor enclosure.
Later modification
Changing an antenna, power supply, housing, cable or installation practice can require a new compliance review.
Tell us what you measure, where it moves and how the result will be used
Share a few process details and our application team will recommend a suitable technology, installation concept and validation plan.