← Back to all product families
Products and systems
Board, sheet and scanning systems
Continuous profiles, classification and cross-web or project-specific scanning.
05Application fit
Where this product family fits
Continuous profiles, classification and cross-web or project-specific scanning.
Continuous boards
Sheet materials
Along-line moisture trending and grading projects
Systems and configuration options
Documented systems, components and project scope
These are representative systems and recorded system elements, not a list of independently orderable SKUs. The final supply boundary is confirmed by model, application review and order.
The result represents the installed microwave path through the continuous board or sheet. Line speed, width, thickness, density, product format and required trend resolution must be validated with reference samples. A fixed-axis or scanning structure is confirmed only during project engineering. Use for trending or grading only within the approved product window; listed elements are system parts, not separate SKUs.
- MW-8000 representative system
- Microwave transmitter and receiver units
- Photoelectric switch and temperature sensor
- Central processor and 15-inch touchscreen console
How the family works
From measurement principle to a usable production result
Continuous profiles, classification and cross-web or project-specific scanning.
Measurement principle and signal source
Board and sheet systems measure moving continuous products along a fixed axis or scanning path. Fast readings are aligned with line position so the plant can see lengthwise or cross-web moisture variation.
What part of the material is represented
The represented volume depends on transmission path, product thickness and scan geometry. Profile resolution must be selected with line speed and the downstream classification decision.
From measurement to production action
The sensor value should travel with validity, material identity and process time. Start with trends and alarms, compare the response with operator observations, and define the exact correction or classification rule before closing the control loop.
How the result is established
Build calibration with paired samples that cover normal variation in moisture, density, temperature, product and operating state. Reserve independent samples for acceptance, document residuals and limits, and define when maintenance or process change triggers a review.
A final configuration is selected only after the measurement volume, mechanical access, influential variables, reference sampling and signal destination are understood together. The family page is the starting route; the installed system combines the appropriate sensor, controller, software, mounting and service scope for the actual process. It also defines fault behaviour, operator access and the records needed to maintain the result after handover.
Selection inputs
Confirm the application before choosing the configuration
Share your material, moisture range and process conditions to receive a focused measurement recommendation.
Contact an engineer- 1What material must be measured?
- 2Where can the sensor be installed?
- 3Surface or total moisture?
- 4How will calibration be referenced?
- 5How must the result connect to PLC, MES or settlement?