Recommended conditions and intended use

Continuous moisture profile and classification for boards and sheet materials.

01

Wood-based panels documented in the brochure

02

Continuous conveyor-based board production

03

A stable transmitter-receiver path through the board

04

Trending or classification within an approved product window

System configuration

Documented components; confirm the ordered configuration

Seven official product systems cover online process sensing, incoming-material inspection and continuous product analysis, with configurations adapted to material and installation conditions.

01Microwave transmitter unit
02Microwave receiver unit
03Photoelectric switch
04Temperature sensor
05Central processor
0615-inch colour touchscreen console

Installation, validation and supply

Influential variables and project boundary

MW-8000 represents the installed transmission path through the moving board. Line speed, width, thickness, density, product format, path alignment, gaps, vibration, temperature and the required profile resolution must be recorded and covered by reference samples. Match samples to line position and time, reserve independent acceptance data and approve grading or control rules only for the demonstrated product window. The brochure documents transmitter and receiver units, photoelectric switch, temperature sensor, processor and 15-inch console; fixed or scanning mechanics, interfaces, software and service are confirmed only by the order.

Inside the measurement route

How this system fits into a working production line

Continuous moisture profile and classification for boards and sheet materials.

01

Measurement principle and represented volume

MW-8000 aligns transmission readings with the position of a moving board to reveal continuous or cross-web moisture variation.

02

How installation conditions influence the result

Synchronise line speed, product width, thickness and scan position. The installation must protect the path without introducing unstable gaps or product vibration.

03

Signal, status and process context

Transmit the moisture value together with engineering units, valid and fault states, product or recipe identity, calibration version and timestamp. Align the value with transport delay before it reaches trends, alarms, PLC logic or quality records.

04

Calibration, acceptance and maintenance

Collect reference samples across the expected operating range, keep a separate acceptance set and record the installed geometry. Routine checks should cover sensor condition, reference residuals, invalid states and changes in material, density, temperature or product format.

The model name identifies a platform, while the working solution is defined by its transmitter or sensor option, controller, mechanical arrangement, signal interfaces and calibration. Product performance therefore remains linked to the supplied configuration and the application range demonstrated during validation.

All blog articles

Related engineering guidance

Production applications2026-08-09

Board and sheet moisture scanning: control across width, thickness and product identity

A board line creates continuous product but quality decisions apply to identifiable sheets, rolls or sections. The measurement system must connect cross-width coverage and time to product identity.

2 min readRead article

Production applications2026-08-09

Wood and engineered-panel moisture control from furnish to finished board

A panel plant may need different moisture views before drying, after blending, in the formed mat and on the finished board. One point cannot answer every stage.

2 min readRead article